Concrete cutting, can be explained in the layman’s terms as the process of creating holes and openings through concrete surfaces, walls and ceilings. This process can be used for more complicated tasks along with revolutionizing tools and methods like coring concrete pile caps to removing unwanted concrete from a site. Concrete cutting, drilling and sawing are one of the greatest challenges for most of the drilling experts because the concrete is one of the toughest materials to work with due to its hardened nature. Special tools are needed to get the job done and safe without damaging the underground utilities and electrical conduits through the concrete.
The good news is that today, a wide range of concrete saws are available in the construction industry for fulfilling out different types of concrete sawing operations such as dry sawing and wet sawing. A concrete saw is nothing but a high-quality tool used by drilling experts to make cuts and openings on hard materials such as brick, masonry, and tile etc., apart from concrete. This tool can be hand-held saw or a big walk behind saw which often work with the support of either electric motors or gasoline.
Dry Sawing- Exclusively for Outdoor Projects
Dry sawing is a concrete cutting technique which is recognized by production of enormous dust; hence it is great for large-scale outdoor projects. Normally, diamond blade is used for dry sawing so that it can be protected from getting overheated in the absence of water. Diamond blades are also very useful for heavy and duty tasks, huge construction schemes and outdoor performances. Dry cutting saws, unlike wet cutting saws, may give off large amounts of dust and other flying chips, which can cause injuries in your respiratory tract. Dry cutting tools and saws are perfect for professionals, as their higher power is incredibly helpful for heavy concrete parts, prolonged jobs and dense concrete.
Wet Sawing Technique
The second important sawing technique that is accepted widely across the world is called wet sawing which is characterised by dust reduction, protecting the operative’s health. Wet sawing is considered as an eco-friendly friendly concert when compared to dry sawing. The saw remains cool because of water, which makes it easier to break through.
Different Types of Sawing Techniques
Wire sawing’s everyday need of the construction industry essential for creating highly accurate cuts or openings in steel and reinforced concrete. If you are looking forward to creating different types of shapes in a variety of different sizes, then nothing can to be more useful to you than wire saws. Wire saws, which can be diamond embedded cables used for creating holes and openings offer tremendous flexibility to contractors and helps in minimising wastage. Since wire sawing is an anti-vibration technique of creating cuts, it does not produce any types of cracks around the openings created by the contractors.
Floor sawing is the most commonly used method for cutting holes and cuts into roads, bridge decks and pavements, where awkward shapes and sizes need to be cut.
The main purpose of wall sawing is to create cuts on vertical structures inside heavily strengthened concrete such as walls. Wall saws are very close to track saws, and they are mostly used in building projects for creating openings such as doors and windows.
The ring sawing technique is predominately used for executing small and medium sized concrete projects. Ring sawing technique is very similar to chain sawing, for creating holes and openings in confined spaces with high accuracy and precision.
Last but not the least, if you are looking forward to hiring concrete contractor to bring innovative solutions to your complex project look no further, contact concrete cutting, nothing is impossible for them to cut.